How To Change Blade On Ryobi Table Saw 2022 | Explained in Easy 7 Steps

The Ryobi table saw is a very popular tool among woodworkers for cutting wood. But sometimes, for continuously using this machine the blade becomes blunt. So, it is important to change the blade.

Besides, to ensure the durability of the blade, you should use it in an appropriate way and change the blade if needed. But how to change the blade on the Ryobi table saw?

Relax! We will describe this process in a very simple and easy way in this article.

When Should You Change the Blade on Ryobi Table Saw?

You should change the blade on your machine –

  • When your blade becomes dull and blunt
  • If the blade teeth are not sharp enough, missing or broken.

How To Change Blade On Ryobi Table Saw in 7 steps

Changing the blade of a table saw machine needs more attention and concentration.  As you will deal with some razor-sharp stuff, you need to ensure proper safety and put your utmost patience.

Before hopping into the entire process, you need to collect some tools and take some safety precautions.

Things You’ll Need:

  1. Philips screwdriver
  2. Open-end wrench
  3. Gloves
  4. Safety goggles

After collecting all the essential equipment and taking the necessary safety precautions – you are all set to change the blade on your machine.

Let’s get started!

Read more: Top 5 Best Ryobi Tools Review | Experts Recommend 1 and 3

Step – 1: Switch off the power supply

It is better to always unplug the machine from the power supply before starting any work on it. And it is a Must when you are going to handle any sharp blade machine. If you forget to do so, then it may cause an accident.

The Ryobi table saw includes a red button as a power switch. So, to ensure your safety you can turn off the power button. You should switch off the power supply appropriately to ignore any kind of sudden threat before you start to change the blade.

Step – 2: Detach the blade guard of the Ryobi table saw

Find the red blade guard that is used to protect the saw blade. The red blade guard contains two screws. With the help of a screwdriver, you need to unscrew the screws.

It is recommended to use the Philips screwdriver to unscrew them. You should remove these screws otherwise they can fall into the blade storage place. Then it will become very hard to regain them.

So, remove the red blade guard after unscrewing it. You may again want it for the new blade, so keep it in a safe position.

Step – 3: Uplift the table saw with the lever

You will find a lever situated directly below the tabletop. You should turn the lever constantly to uplift the table saw

There is a lever underneath the tabletop. Until you reach the highest position, you should turn the lever continuously to raise the saw.

After reaching the highest position, use an open-end wrench to hold the blade installed shaft, it is known as an arbor. You will find a nut at the end of this arbor, which is known as an arbor nut.

Use the other wrench to unscrew the nut. As the blade is very sharp so you should pay extra attention while doing this. Once you slip accidentally, you may have a major cut by the sharp blade. To ignore any unpleasant situation, you can wear thick hand gloves to protect your hands.

Step – 4: Now use fingers to unscrew the arbor nut

Once you feel that the arbor nut can move freely, it indicates the nut has already loosened enough. So, it is time to use your fingers to completely unscrew it.

Using your fingers to unscrew the nut is much more convenient compared to using a wrench. While removing the washer and nut, you need to keep in mind that you should not drop the washer and nut. Otherwise, you have to bring new ones.

Step – 5: Remove the old blade and install the new one

While removing the sharp blade, you should be very careful. Once you successfully remove the saw blade, now it is time to install the new blade.

You will find a tip – it will help you to fix the blade appropriately. Always remember, you should keep the blade top at an outward position. So, once you have installed the new blade, you should fix the washer.

Step – 6: Screw the nut and tighten it

You can simply screw the arbor nut as much as you can with your fingers. And after that tighten the nut using a wrench. Do not forget to be careful as the blade is too sharp.

Step – 7: Lower the blade and protect it with the blade guard

After screwing and tightening the nut, now it is time to lower the blade and get it at the lowest position. Then put the blade guard in the right place and tighten the screws with the Philips screwdriver.

All Done! You are ready to go with your new blade!

How To Change Blade On Ryobi Table Saw

Some Exclusive Tips to Remember!

Your Ryobi table saw’s reliability will depend on the nature of your work and how often you use the machine.

Here, you will get some tips to extend its durability and use for a longer period of time.

  • To extend the longevity of the saw blade, try to clean the blade twice or thrice in a year.
  • Excessive use may cause damage so you should sharpen the saw blade on a regular basis.
  • To ensure proper maintenance, you should handle the machine gently and store it properly.

Ending Words

Isn’t it simple, guys? We want to share this process in an easy way. Hope our simple and detailed guideline on how to change blade on Ryobi table saw will assist you to change the blade on your machine.

Though the sharpness of the blade makes the process a bit tricky. But with the proper safety precautions and easy steps which we explained through this article – you can effortlessly change the blade on your Ryobi table saw.

Leave a Comment